不銹鋼材料材料1.4313是馬氏體級，耐浸蝕高，熱清理回火后耐久度性好。X3CrNiMo13-4鋼的機戒的效果是會因為化學反應化學物質中鉬和鎳的高氨水濃度。他們不銹鋼材料填加劑局限了添加級碳氨水濃度的是需要——給定氨水濃度相對于奧氏體不銹鋼材料材料。而是鎳氨水濃度不太高，但鎳氨水濃度約為4%，重要的提升了鋼對各類浸蝕氛圍的抗御力——重新機戒的效果。X3CrNiMo13-4鋼用戶名可生孩子達300℃在室內環境溫度下運作的配件和配件，包括表露在各類浸蝕氛圍中的配件，同時要保持非常的表明具體環境括抗氯化物特征)。QT650.QT780和QT900具體環境下，熱清理回火后通常支付H型鋼。半原料在能量生孩子.紙業.在冶金工程和能量行業內，齒輪機表露在高溫暖超低溫下.泵.收縮機元件。鋼不適反應合焊接工藝。

MATERIAL SPECIFICATIONS -BS EN10083-3 (2005)

CHEMICAL COMPOSITION (WEIGHT %)

C (％): ≤ 0.050Si (％): ≤ 0.70Mn (％):≤ 1.50P (％)≤:0.040S (％)≤:0.030Cr (％): 12.0 ~ 14.0Ni (％): 3.50~ 4.50Mo (％):0.30 ~ 0.70Other (％): N ≥ 0.020

MECHANICAL PROPERTYBASED ON THE DIFFERENT HEAT TREATMENT CONDITIONS

Condition of thermal treatment: annealedHardness HBS: 320Tensile strength σb/MPa:1100Thickness/≤mm: 60Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: 60<d≤160Condition of thermal treatment: QT650Yield strength σ0.2≥/MPa:520Tensile strength σb/MPa:650~830Elongation δ(transversal)≥(％): 12Impact absorbing power Akv≥/J|transversal: 50Thickness/≤mm: ≤160Condition of thermal treatment: QT780Yield strength σ0.2≥/MPa:620Tensile strength σb/MPa:780~980Elongation δ( longitudinal )≥(％):15Impact absorbing power Akv≥/J| longitudinal:70Thickness/≤mm: ≤160Condition of thermal treatment: QT900Yield strength σ0.2≥/MPa:800Tensile strength σb/MPa:900~1100Elongation δ( longitudinal )≥(％):12Impact absorbing power Akv≥/J| longitudinal:50提供EN1.4313馬氏體不銹鋼材質的具備著退火工藝性質（+A）情形、回火和回火(+QT650)調質(+QT700)，調質(+QT780)，調質(+QT900)，想要哪一種一些 要跟業務范圍說明確哦。